Centauri Carbon TL4980 - how to connect the slicer software

The Centauri Carbon TL4980 can be remotely operated by PCs on the same network. 

Slicer software is here. There's a video on how to connect it here. 

How to connect your printer

First connect your printer to your Wi-Fi router.

Power on your printer, press the gear on the display, and then press Network.

Select your Wi-Fi access point from the right-side list.

Type your Wi-Fi password and press Confirm.

Make a note of the IP address that the printer has been given by your Wi-Fi router.

In the Elegoo Slicer

Go to Prepare, and press the Wi-Fi symbol to the right of the printer name.

Type the IP address of your printer into the Hostname box and press Tab.

Press Test to confirm the printer is connectable, and press OK twice to save.