I need a replacement Mains power supply or power pack.

We sell 100v to 240v mains power supply plugpacks with a wide range of output Volts and Amps that can be used in place of lost or broken brand-name power supplies that were originally included with devices.

Check the label on your plugpack or device. It should look something like this:

The power pack above outputs 12 Volts and 1000mA (or 1Amp) to its device - you can tell if the output is DC or AC electricity by looking for these symbols below:

And, as long as your power supply has a single-pin plug like one of the plugs shown above, we can assist!

Finding your power supply:

Look for the Voltage on the left side of the grid below, and then find the current (Amps) across the top row. A slightly higher Amps rating is fine in most cases. Click the code at the intersection to see a suitable power supply.

If you are not sure, take a picture of the label on the device or power supply, and use the chat bubble below to contact us, or visit any of our stores and the staff will be happy to assist.